Send inquiry
Tilting 315 series rotary table is one of the main accessories for milling, boring and drilling machines. It can be used for machining, the oblique hole or surface and hole of compound angle at one set-up. Besides this, it is so designed as to be used in a vertical position to carry out center work with a tailstock.
This table can be tilted to any position from 0~90 and locked.
A flange for connecting scroll chuck is special supplied, and be packed indepengent. For special order, the dividing plates accessory allows the operator to accurately divide the 360 degree rotation of the clamping surface into divisions of 2 through 66, and all divisible of 2, 3 and 5 from 67-132.
This table can be tilted to any position from 0~90 and locked.
A flange for connecting scroll chuck is special supplied, and be packed indepengent. For special order, the dividing plates accessory allows the operator to accurately divide the 360 degree rotation of the clamping surface into divisions of 2 through 66, and all divisible of 2, 3 and 5 from 67-132.
| Items | 31515 | 31516 | 31517 | 31518 | ||
| Table diameter mm | Φ160 | Φ250 | Φ320 | Φ400 | ||
| Morse taper of the center hole | 2# | 3# | 4# | 4# | ||
| Diameter of the center hole mm | Φ25X6 | Φ30X6 | Φ40X10 | Φ40X10 | ||
| Width of the T-slot mm | 10 | 12 | 14 | 14 | ||
| Adjacent angle of table T-slot | 90° | 60° | 60° | 60° | ||
| Width of the locating key mm | 12 | 14 | 18 | 18 | ||
| MOdule of the worm gear | 1.5 | 2 | 2.5 | 3.5 | ||
| Transmission ratio of the worm gear | 1:90 | 1:90 | 1:90 | 1:90 | ||
| Graduation of the table | 360° | 360° | 360° | 360° | ||
| Tilting angle | 0°~90° | 0°~90° | 0°~90° | 0°~90° | ||
| Readout of the handwheel | 1´´ | 1´´ | 1´´ | 1´´ | ||
| MInimum value of vernier | 10´´ | 10´´ | 10´´ | 10´´ | ||
| Max.bearing (with table Hor.)kg | 100 | 200 | 250 | 300 | ||
| Max.bearing (with table Vert.)kg | 50 | 100 | 125 | 150 |